포스테크
 
HOME > 제품소개 > AMETEK > DC Power Supply
 
제품소개
TEKTRONIX
AMETEK
- 전체
- DC Power Supply
- Bench Power Supply
- AC Power Supply
- Modular AC/DC Power
- Electronic Load
- Compliance Testing
- Custom Power Supply
HIOKI
GW INSTEK
FLUKE
 
AMETEK 고품질의 제품과 최고의 서비스를 제공할 것을 약속드립니다
Full & 1/2 Rack Programmable DC Power Supplies
제품번호XG850 series
제 품 명Full & 1/2 Rack Programmable DC Power Supplies
제품분류DC Power Supply
상세설명The Sorensen XG Series is an 850 Watt, 1U half-rack DC power supply. The XG Series is the new standard for powerful, programmable DC power systems. Designed for test, production, laboratory, OEM and quality assurance applications, the XG Series provides a wealth of features to ensure accuracy and greater efficiency. It puts clean, reliable power at your disposal and delivers stable, variable output voltage and current for a broad range of development, test and system requirements.
 
 
Sorensen XG 850 Watt Series

8e60f2784665c49d6fbd357fd9902329_1568619
 

Product Overview

The Sorensen XG Series is an 850 Watt, 1U half-rack DC power supply. The XG Series is the new standard for powerful, programmable DC power systems. Designed for test, production, laboratory, OEM and quality assurance applications, the XG Series provides a wealth of features to ensure accuracy and greater efficiency. It puts clean, reliable power at your disposal and delivers stable, variable output voltage and current for a broad range of development, test and system requirements.

 

Features And Benefits

 

- Easy Integration

 XG 1700 has many control and indication signals such as shutdown, constant voltage (CV) vs. constant current (CC) mode indication, OVP, OCP, OTP, and so on. In addition, the logical-high or -low is free selectable. Thus enabling the XG 1700 to replace existing power supplies with little or no system engineering required.

 

- Free Selectable Analog Control Range

Most DC power supplies provide a 0 to 5 or 0 to 10 V analog control range to control the DC output from zero to full DC output range. With the XG 1700, the analog control range is free selectable starting at 0V to an upper range between 2V and 10V. In other words, the analog programming interface range is freely adjustable.

 

- Auxiliary DC Output Channels with Control

In many ATE systems one or more low power, fixed voltage supplies are needed to provide electrical power for any periphery within the ATE cabinet. For this purpose, the XG 1700 provides two standard auxiliary DC output channels. Both auxiliary power channels are controllable directly from the front-panel or through SCPI commands. With these channels, it is possible to drive outputdisconnect or polarity-reversal relays, without needing a complicated computer controlled relay board.

 

- DC-Waveforms Through Internal Sequencing  

To allow for extremely fast programming, sequences can be programmed into and stored in memory using standard SCPI commands through USB, RS-232/485, LXI or GPIB.

 

- Variable Fan Speed Control

The XG 1700’s innovative approach to fan speed is determined by internal heat sink temperature. This allows the fans to adjust to a constant optimal speed when the output of the supply is being pulsed. This also reduces noise and increases fan life.

 

- Power Saving Standby Mode

When the XG 1700 has been in an idle state, the supply can go into “sleep mode”, much like a computer monitor. This will allow the user to save energy and minimize lab noise. Since an XG 1700 left in sleep mode is still “on” the user will have quicker access to an enabled output.

 

- Output Auto Start Mode (Auto Restart)

The Auto Start mode establishes the state of the output of the power supply after recovery from a complete power cycle (all front panel LEDs are not illuminated), or after recovery from a PC failure or reboot. If Auto Start mode is set to On, the power supply output will return to its previous value. Also, after the loss of any remote digital control, the XG unit will remain active in its last programmed setting and will not disrupt any test process.

 

- Auxiliary Auto Start Mode
The Auxiliary Auto Start mode determines the state of the auxiliary output after a complete power cycle (all front panel LEDS are not illuminated). With Auxiliary Auto Start mode turned to On, the auxiliary output will be activated after the power supply is powered up again.

 

- Foldback Mode

 Foldback mode is used to disable the output when a transition is made between the operating modes. The power supply will turn off/disable the output and lock in foldback mode after a specified delay if the power supply transitions into CV mode or into CC mode, depending on the foldback mode settings. This feature is particularly useful for protecting current or voltage sensitive loads. Foldback can be set to trigger a switch when transitioning from CV to CC mode or from CC to CV mode.

 

Specifications 

 

8e60f2784665c49d6fbd357fd9902329_1568619
8e60f2784665c49d6fbd357fd9902329_1568619
8e60f2784665c49d6fbd357fd9902329_1568619
8e60f2784665c49d6fbd357fd9902329_1568619 

 

 

 

 

 

 
회사소개 ㅣ 이용안내 ㅣ 고객센터 ㅣ 찾아오시는 길


㈜포스테크inc / 소재지 : 경기도 성남시 사기막골로 45번길 14 성남우림라이온스밸리2차 A동 1614호
TEL : 031-8018-2300 ~2303 FAX : 031-8018-2304

Copyrightⓒ 2015. 포스테크 All Rights Reserved.